Re: XON/XOFF flow control on LaserWriter+

Article View: comp.sys.sun

Article #11665

#11665

From: Marcel Bernards
Date: Wed, 22 Mar 1989 23:37

29 lines
1425 bytes

I had also a bunch of problems getting the &$#@#@$&mned LaserWriter
printing properly.

I hacked some wiring problems with DTR:

The standart flowcontrols from transcript can be used with the following
cable:

SUN                    LW

2 ---------\ /--------- 3
            X
3 ---------/ \--------- 2

4 --+               +-- 4
    |               |
5 --+               +-- 5

7 --------------------- 7

A while agoo i saw a small PostScript program to fix the problem but i
cannot reproduce that program ( I'm not a great postscript expert ;-( It
was some serverdict bungling....

Hope this will solve your LW+ problems....

Marcel Bernards, UNIX & Net sysadm Netherlands Energy Research Foundation ECN
P.O. Box 1,1755 ZG Petten, PHONE: 09 312246 4342 EARN/BITNET: ESU0130@HPEENR51L
IP: marcel%ecn.uucp@nluug.nl UUCP: marcel@ecn.uucp,marcel%ecn.uucp@uunet.uu.net

Technical Details

Message-ID: <8902200853.AA18619@ecn.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: ecn!marcel@nluug.nl (Marcel Bernards)
Newsgroups: comp.sys.sun
Subject: Re: XON/XOFF flow control on LaserWriter+
Keywords: Hardware
Message-ID: <8902200853.AA18619@ecn.UUCP>
Date: 22 Mar 89 23:37:00 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 29
Approved: Sun-Spots@rice.edu
Original-Date: Mon, 20 Feb 89 09:53:42 +0100
X-Sun-Spots-Digest: Volume 7, Issue 205, message 4 of 13