kermit from SunOS to ethernet?

Article View: comp.sys.sun

Article #11810

#11810

From: George A. Planansky
Date: Thu, 30 Mar 1989 22:05

19 lines
1426 bytes

Kermit asks for a "line", being a /dev/tty#, to get out of a Unix machine.
Our Unix machines have no available serial ports, as we connect to them
via their ethernet controllers.  We DO have 3COM (Bridge) CS210
communications servers (tcp/ip) connected on our ethernet, so we can
connect, modems, etc. through these servers to ethernet.  

Thus I can use the Unix telnet command to connect to a modem interactively, 
and I can pipe through a telnet script:
   #
   cat | (telnet modem.address) >>& modem.log
to a modem.  But I cannot start Kermit and get to a modem or to
anything else on ethernet.

QUESTION:  how can I get to an ethernet address, with kermit, from Unix?
Oddly, this "simple" thing is darned elusive. 

I can get email at:  gplan@ra.umb.edu.
Otherwise I am George Planansky, at Atmosphere Environment Research,
840 Memorial Drive, Cambridge MA 02138, USA; phone (617) 547-6207.

Technical Details

Message-ID: <756@umb.umb.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: contact!umb!gplan@husc6.harvard.edu (George A. Planansky)
Newsgroups: comp.sys.sun
Subject: kermit from SunOS to ethernet?
Keywords: Networks
Message-ID: <756@umb.umb.edu>
Date: 30 Mar 89 22:05:02 GMT
Sender: usenet@rice.edu
Organization: UMASS-Boston, Boston, MA
Lines: 19
Approved: Sun-Spots@rice.edu
Original-Date: 19 Mar 89 07:20:40 GMT
X-Sun-Spots-Digest: Volume 7, Issue 216, message 12 of 13