Article View: comp.sys.sun
Article #12343Re: CDC & 753 Xylogics
From: Phil Ritzenthaler
Date: Thu, 27 Apr 1989 05:26
Date: Thu, 27 Apr 1989 05:26
29 lines
1675 bytes
1675 bytes
David Classen <dclassen@swift.bcm.tmc.edu>:
> My Sun 4/260 crashes with a an eror message of
>
> spurious VME interupt at processor level 5 VME level
> 3, VME vector 0xffffffff
>
> this happens when I try to tar one file system to another or when I run
> suninstall and it's trying to load the usr partition.
NOTE: TO ANYONE INSTALLING A XYLOGICS 753 WHILE RETAINING THEIR 451 CONTROLLER
Xylogics had a MAJOR BUG in their firmware!!! I was experiencing THE SAME
EXACT error message as Dave did. The solution is to RETURN your board to
the company you purchased it from and have them send you the LATEST REV
level from Xylogics (date 27-Mar-1989 (?)).
After installing the new board, I am running:
4/280 32M memory
SCSI tape
Xylogics 451 with 1 Hitachi DK815-10
Xylogics 753 with 2 Fujitsu M2372K
with no problems (knock on wood . . .).
Phil Ritzenthaler Advanced Computing Center for the Arts & Design (ACCAD)
Systems Manager The Ohio State University
UUCP: ...!{pyramid,killer}!grumpy.cgrg.ohio-state.edu!phil
ARPA: phil@grumpy.cgrg.ohio-state.edu
Technical Details
Message-ID:
<8904121706.AA00474@bashful.cgrg.ohio-state.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!bbn!mit-eddie!uw-beaver!rice!sun-spots-requestShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!bbn!mit-eddie!uw-beaver!rice!sun-spots-request From: phil@bashful.cgrg.ohio-state.edu (Phil Ritzenthaler) Newsgroups: comp.sys.sun Subject: Re: CDC & 753 Xylogics Keywords: Hardware Message-ID: <8904121706.AA00474@bashful.cgrg.ohio-state.edu> Date: 27 Apr 89 05:26:41 GMT Sender: usenet@rice.edu Organization: Sun-Spots Lines: 29 Approved: Sun-Spots@rice.edu Original-Date: Wed, 12 Apr 89 13:06:22 EDT X-Sun-Spots-Digest: Volume 7, Issue 257, message 4 of 16