Article View: comp.sys.sun
Article #12582{n,pt}roff with mm on suns
From: Joe Wells
Date: Sat, 06 May 1989 16:14
Date: Sat, 06 May 1989 16:14
18 lines
1351 bytes
1351 bytes
In Sun-Spots-Digest: vol. 7, no. 239, msg. 21 of 21, S. Cowles writes:
i would like very much to use memorandum macros with nroff and/or ptroff
on a sun 4. unfortunately, when i do, i get unusable page numbers. the
page numbers come out with about 102 leading zero's in spite of specifying
.af P 1 before any page numbers are printed. the versions of mm that i
have been trying are 10.108 and 11.47. i've noticed that the number
register P has a size of 3 (using the .pm call).
{n,pt,ps}roff under SunOS (some versions?) does not support the "\g"
interpolation command. The "\g" command is used by the "mm" macro package
in several places. I can tell you how to modify your copy of the "mmt"
file so that it works.
--
Joe Wells <jbw@bucsf.bu.edu>
jbw%bucsf.bu.edu@bu-it.bu.edu
...!harvard!bu-cs!bucsf!jbw
Technical Details
Message-ID:
<8904231942.AA31232@banana6000.bu.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-requestShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: jbw%bucsf.BU.EDU@bu-cs.bu.edu (Joe Wells)
Newsgroups: comp.sys.sun
Subject: {n,pt}roff with mm on suns
Keywords: Software
Message-ID: <8904231942.AA31232@banana6000.bu.edu>
Date: 6 May 89 16:14:53 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 18
Approved: Sun-Spots@rice.edu
Original-Date: Sun, 23 Apr 89 15:42:34 edt
X-Sun-Spots-Digest: Volume 7, Issue 272, message 19 of 19