Re: problems with transcript2.0 on sun

Article View: comp.sys.sun

Article #12757

#12757

From: Brett Chapman x5156
Date: Thu, 11 May 1989 04:27

16 lines
1260 bytes

The printcap entry you posted looks correct.  Note though that I have not
seen pl and pw work.

You may want to check that the kernel for that machine is correct when it
comes to that port (SUN default), and that the PROM is set correctly for
that port (default once again).  I am not sure that eitherof these would
cause your problem, but it's worth a check.  Also, check your cable.

Otherwise, I have no other real ideas.


                                        Brett Chapman
                                        G.E. Medical Systems
                                        (414) 548-5156
                                        uunet!{steinmetz,crdgw1}!gemed!chapmanB
                                        sun!sunbrew!gemed!chapmanB

Technical Details

Message-ID: <8905050005.AA17354@gemed.com>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!husc6!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!husc6!rice!sun-spots-request
From: gemed!blc@crdgw1.ge.com (Brett Chapman  x5156  )
Newsgroups: comp.sys.sun
Subject: Re: problems with transcript2.0 on sun
Keywords: Software
Message-ID: <8905050005.AA17354@gemed.com>
Date: 11 May 89 04:27:45 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 16
Approved: Sun-Spots@rice.edu
Original-Date: Thu, 4 May 89 19:05:04 CDT
X-Sun-Spots-Digest: Volume 7, Issue 281, message 11 of 19