Tar(1) somtimes hangs 1/4" tape drive

Article View: comp.sys.sun

Article #12830

#12830

From: jdh
Date: Tue, 16 May 1989 16:46

15 lines
1170 bytes

> I have a 3/260 running 4.0.1.  The system also has a 1/4 inch SCSI tape
> drive.  Sometimes when using tar(1) to extract files from a tar tape, the
> tar process will hang.  The tar(1) process is still there and I've tried
> killing it but it does not die.  The only way to free up the tape drive is
> to reboot the system.  Even the reboot process complains a little bit
> about "some processes would not die" or words to that effect.

We had this problem when we went from 4.0 to 4.0.1; what i did was
to remove the patch labeled `scsi'

Our 1/4" tape isn't used a lot, so I guess it's possible that this
could be a red herring..

- -Jason Heirtzler
   jdh@bu-it.bu.edu

Technical Details

Message-ID: <8905090025.AA18379@buit4.bu.edu>

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!bbn!husc6!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!bbn!husc6!rice!sun-spots-request
From: jdh@bu-it.bu.edu
Newsgroups: comp.sys.sun
Subject: Tar(1) somtimes hangs 1/4" tape drive
Keywords: Hardware
Message-ID: <8905090025.AA18379@buit4.bu.edu>
Date: 16 May 89 16:46:25 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 15
Approved: Sun-Spots@rice.edu
Original-Date: Mon, 8 May 89 20:25:11 EDT
X-Sun-Spots-Digest: Volume 7, Issue 287, message 10 of 13