Converting to Mach?

Article View: comp.sys.sun

Article #12910

#12910

From: Steve Chappelow
Date: Tue, 09 May 1989 22:27

15 lines
1240 bytes

Our site is in the planning stages of converting to Mach and would like to
hear about other successes or failures.

In particular we would like to know about the CMU distribution on an
Encore Multimax as compared to the Encore released version, i.e. is it
worth paying Encore for the convenience?  We are currently running Umax
4.2 and would like to know if there are any problems with the conversion,
either using CMU's or Encore's.

Another question is, to what machines has Mach been ported?  I seem to
remember reading something about running Mach on a Sun.  Specifically are
there any projects working with SGI iris, DG/88000, or Suns?

Steve Chappelow        Systems Programmer       EMBA Computer Facility
(chappelo@uvm.edu || uunet!uvm-gen!chappelo)

Technical Details

Message-ID: <1181@uvm-gen.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!mit-eddie!uw-beaver!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!mit-eddie!uw-beaver!rice!sun-spots-request
From: chappelo@uvm-gen.uvm.edu (Steve Chappelow)
Newsgroups: comp.sys.sun
Subject: Converting to Mach?
Keywords: Miscellaneous
Message-ID: <1181@uvm-gen.UUCP>
Date: 9 May 89 22:27:25 GMT
Sender: usenet@rice.edu
Organization: EMBA-CF, University of Vermont
Lines: 15
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 7, Issue 293, message 13 of 13