🚀 go-pugleaf

Patzschke + Rasp GmbH
Software und Systeme
Niederwaldstr. 6
D-6200 Wiesbaden
West Germany

                The Problem  : multiple peripheral devices

              If YOU have the problem - WE have the solution.

                    The Solution : scsi-P Port expander	


If you have more than two printers and/or terminals you'll get into deep
troubles, if you want to use them simultanously. Either you can use only
one terminal and one printer or only two terminals. There is no way to
connect more than two peripherals via a serial line to your workstation.
It will be much more difficult to attach a printer which interfaces only
with a parallel Centronix port. 

Therefore we developped a port expander which offers you 4 serial
interfaces (with upto 76.8Kbaud transfer rate; hardware or software
handshaking...) and 2 parallel interfaces per unit. An optional IEEE 488
bus interface allows you to connect measurement systems to your
workstation.  The port expander is available for all Sun workatstions
(3/xxx, 4/xxx and 386i).

One, two or three scsi-P port expander units will upgrade your Sun desktop
workstation to a terminal server.

The scsi-P port expander interfaces with your workstation via the SCSI bus
(Small Computer System Interface) like a disk drive or a streamer tape.

Please call us or send your questions via email to

karl@apollon.uucp      (Karl Kipry - Patzschke + Rasp GmbH)
christof@apollon.uucp  (Christof Schad - Patzschke + Rasp GmbH)


and ask for a detailed informations.

         Patzschke + Rasp GmbH, Niederwaldstr. 6, 6200 Wiesbaden

		            Tel.: 06121-86023
		            Fax.: 06121-805805