Article View: comp.sys.sun
Article #1308Problems with Fujitsu M2246E under Sun_OS 4.0.3
From: Matthias Bokel
Date: Wed, 30 Aug 1989 09:09
Date: Wed, 30 Aug 1989 09:09
16 lines
1077 bytes
1077 bytes
There arise a problem by updating Sun_OS 3.0 to Sun_OS 4.0.3 . After doing this we can't format our disk. We want to format the disk with following Parameters : 817 cylinders , 2 alternates This is impossible and the error occurs by writing back the bad block list and the label on the last two cylinders. We got some hints to solve this problem by decreasing the numbers of the cylinders, this has no effect. The disk is a Fujitsu M2246E and it seems to be a special problem of this disk. Thanks for hints and proved solutions Mailadress : mattes@cadlab.uucp mattes@cadlab.unido
Technical Details
Message-ID:
<1230@brazos.Rice.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!mit-eddie!uw-beaver!rice!sun-spots-requestShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!mit-eddie!uw-beaver!rice!sun-spots-request From: cadlab!mattes@mcsun.eu.net (Matthias Bokel) Newsgroups: comp.sys.sun Subject: Problems with Fujitsu M2246E under Sun_OS 4.0.3 Keywords: Hardware Message-ID: <1230@brazos.Rice.edu> Date: 30 Aug 89 09:09:21 GMT Sender: root@rice.edu Organization: Sun-Spots Lines: 16 Approved: Sun-Spots@rice.edu X-Sun-Spots-Digest: Volume 8, Issue 109, message 6 of 12