Re: Upgrade 3/280->4/380

Article View: comp.sys.sun

Article #13212

#13212

From: weber
Date: Fri, 08 Dec 1989 14:41

7 lines
836 bytes

As far as I know there isn't anyone with board level memory for the newer
4/300 systems.  I would suggest that you just buy 4MB SIMMS for the CPU
board and run with that until those products are available.  That will
give you 32MB on the CPU board (it comes with 8MB standard).  Remember
that the 4/300 CPU board requires 2 slots, framebuffer or not.

Regards, Jeff Weber

Technical Details

Message-ID: <3861@brazos.Rice.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!rice!sun-spots-request
From: weber@cg-atla.agfa.com
Newsgroups: comp.sys.sun
Subject: Re: Upgrade 3/280->4/380
Keywords: Hardware
Message-ID: <3861@brazos.Rice.edu>
Date: 8 Dec 89 14:41:51 GMT
Sender: root@rice.edu
Organization: Sun-Spots
Lines: 7
Approved: Sun-Spots@rice.edu
X-Refs:  Original: v8n205, Replies: v8n212
X-Sun-Spots-Digest: Volume 8, Issue 220, message 11 of 19