Switch settings for second ALM-I in a Sun 3/160 needed.

Article View: comp.sys.sun

Article #13310

#13310

From: stefan mochnacki
Date: Tue, 12 Dec 1989 19:53

17 lines
1415 bytes

We have a second ALM-1 to install in a Sun 3/160. It has one of the newer
MultiBus-VME adapters, so I have some freedom about slot placement.
However, I can't find anywhere what settings have to be made on a SECOND
ALM-1. The config file has information containing:

mti0      csr 0x620      mtiintr 0x88   (among other things...)
mti1      csr 0x640      mtiintr 0x89

How do these differences translate to switch settings on the ALM's and
adapters? I can't easily locate any useful documentation, and people with
multiple ALM's around here have ALM-II's, not I's. I would be VERY
grateful if someone can tell me what the differences are (the 2nd board
came configured as a 1st ALM in a 3/160).

Stefan W. Mochnacki          INTERNET - stefan@centaur.astro.utoronto.ca
Astronomy, U. of Toronto     UUCP - {uunet,pyramid}!utai!helios!stefan
Ph. (416) 884-9562           BITNET - mochnacki@utorphys.bitnet

Technical Details

Message-ID: <3983@brazos.Rice.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!cs.utexas.edu!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!cs.utexas.edu!rice!sun-spots-request
From: stefan@centaur.astro.utoronto.ca (stefan mochnacki)
Newsgroups: comp.sys.sun
Subject: Switch settings for second ALM-I in a Sun 3/160 needed.
Keywords: Hardware
Message-ID: <3983@brazos.Rice.edu>
Date: 12 Dec 89 19:53:01 GMT
Sender: news@rice.edu
Organization: Sun-Spots
Lines: 17
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 8, Issue 227, message 13 of 18