Re: Mini-DIN Audio Input Connector for a Sparc 1

Article View: comp.sys.sun

Article #13418

#13418

From: Darel Linebarger
Date: Fri, 26 Jan 1990 14:58

25 lines
1254 bytes

The wiring diagram for the mini-din connector in v8n128 was incorrect.
The correct wiring diagram for the cable connector is:

	6   7   8

	3   4   5

	  1   2

The pin numbers for the connector on the pizza box would be mirror imaged
from this diagram. We have both microphone input and speaker output with a
cable built according to this diagram and the table in the Sparcstation 1
SunOS 4.0.3 Sun-4c release notes:

Pin 3	Mic. tip
Pin 6	Mic. ring
Pin 7	Speaker ring (sleeve)
Pin 8	Speaker tip (center connections - not stereo)

We bought our microphone and self-amplifying speaker (MPS-5 model
32-2031A) from Radio Shack. The speaker was about $20 and the microphone
(33-992c) was about $28.

Darel Linebarger
University of Texas at Dallas

Technical Details

Message-ID: <4474@brazos.Rice.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!umich!yale!cs.utexas.edu!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!umich!yale!cs.utexas.edu!rice!sun-spots-request
From: dl@utdallas.edu (Darel Linebarger)
Newsgroups: comp.sys.sun
Subject: Re: Mini-DIN Audio Input Connector for a Sparc 1
Keywords: Hardware
Message-ID: <4474@brazos.Rice.edu>
Date: 26 Jan 90 14:58:19 GMT
Sender: root@rice.edu
Organization: Sun-Spots
Lines: 25
Approved: Sun-Spots@rice.edu
X-Refs:  Related: v8n128
X-Sun-Spots-Digest: Volume 9, Issue 14, message 1 of 14