jumpers

Article View: comp.sys.sun

Article #13430

#13430

From: Ted Kim (Random Dude)
Date: Sat, 27 Jan 1990 20:42

15 lines
1110 bytes

If you have a 3/460, 3/470, 3/480, you should note an error in:

	Sun 3400 CPU Board Configuration Manual
	(PN 813-2055-11, Rev A 15 May 1989)

The 3-4 jumper in J2100 (at N-19 on the board), should be IN and should be
factory installed that way. (In the manual, it says this jumper is
reserved, should be OUT and is factory installed that way.) If it's not
in, the CPU board will be happy and pass all self-tests, but won't find
a SMD4 controller.

Ted Kim                           
UCLA Computer Science Department  Internet: tek@penzance.cs.ucla.edu
3804C Boelter Hall                UUCP:    ...!{uunet|ucbvax}!cs.ucla.edu!tek
Los Angeles, CA 90024		  Phone:   (213) 206-8696

Technical Details

Message-ID: <4489@brazos.Rice.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!rice!sun-spots-request
From: tek@cs.ucla.edu (Ted Kim (Random Dude))
Newsgroups: comp.sys.sun
Subject: jumpers
Keywords: Hardware
Message-ID: <4489@brazos.Rice.edu>
Date: 27 Jan 90 20:42:33 GMT
Sender: root@rice.edu
Organization: Sun-Spots
Lines: 15
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 9, Issue 14, message 13 of 14