SPARC 330 SCSI cabling

Article View: comp.sys.sun

Article #13601

#13601

From: John C. Schultz
Date: Sat, 03 Feb 1990 18:08

11 lines
1032 bytes

Has anyone had problems/solutions with the SCSI cabling on the SPARC
4/330?  This SCSI cable uses a very fine pitch connector and the one on my
4/330 seems to have intermittent connection problems.  For example the
position of the cable causes/eliminates boot problems. At the moment, the
intermittent cable seems to have trashed the / disk partition beyond
fsck's ability to recover so the problem is potentially quite serious.

John C. Schultz                   EMAIL: jcschultz@mmm.3m.com
3M Company,  Building 518-01-1     WRK: +1 (612) 733 4047
1865 Woodlane Drive, Dock 4
Woodbury, MN  55125

Technical Details

Message-ID: <4754@brazos.Rice.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!rice!sun-spots-request
From: us214777@mmm.serc.3m.com (John C. Schultz)
Newsgroups: comp.sys.sun
Subject: SPARC 330 SCSI cabling
Keywords: Hardware
Message-ID: <4754@brazos.Rice.edu>
Date: 3 Feb 90 18:08:33 GMT
Sender: root@rice.edu
Organization: Sun-Spots
Lines: 11
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 9, Issue 30, message 10 of 13