🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.sun
Article #13841

Trouble starting automounter

#13841
From: Dikran Kassabian
Date: Fri, 16 Feb 1990 16:36
54 lines
2775 bytes
I'm interested in using the automounter, but have run into some troubles.
Perhaps some of you have seen this, and can tell me what I'm doing wrong.

If I try to start the automounter from rc.local like this:

| if [ -f /usr/etc/automount ]; then
| 	automount /Net/home      /etc/auto-home
| 	automount /Net/var/spool /etc/auto-var
| 	(echo -n ' automount')>/dev/console
| fi

all works well.  The indirect maps indicated are used and things are
dandy.  If I try to use a direct map, and a master map, like this:

| if [ -f /usr/etc/automount -a -f /etc/auto.master ]; then
| 	# /usr/etc/automount -M /Net -f /etc/auto.master
| 	/usr/etc/automount -f /etc/auto.master
| 	(echo -n ' automount')>/dev/console
| fi

where auto.master contains a single line like this:

| /-    auto.direct

and  auto.direct contains this:

| /home/host1            -rw,hard,intr              host1:/home/host1      
| /home/host2            -rw,hard,intr              host2:/home/host2      
| /var/spool/mail        -rw,hard,intr              host3:/var/spool/mail 
| /usr/lib/news          -ro,soft                   host3:/usr/lib/news   
| /var/spool/news        -ro,soft                   host3:/var/spool/news 

the daemon fails to start from rc.local (or rather, it does not exist in
the process table once the system is fully up with root logged in).  But
if I allow the system to boot, and then once logged in as root I type from
a csh

hostname# /usr/etc/automount -f /etc/auto.master

things work just fine.   The automounter works as I would expect at this
point (leading me to believe that my maps are okay and that the command
line is formatted okay). What is the important difference here?  I have
tried using a bourne shell to start the daemon, I have tried booting up
single user and starting the daemon from there.  Nothing works.

Details:  all systems are sun3 arch and running SunOS 4.0.3.  We use
yellow-pages, but do not use a yp-based auto.master.  portmap and ypbind
are up before automounter tries to start.

Has anybody encountered this before?  I welcome any suggestions.  Please
reply by email.  I'll summarize if there's anough interest.

      ^Deke Kassabian,   deke@ee.rochester.edu   or   ur-valhalla!deke
   Univ of Rochester, Dept of EE, Rochester, NY 14627     (+1 716-275-3106)
Technical Details
Message-ID: <5069@brazos.Rice.edu>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!rice!sun-spots-request

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!rice!sun-spots-request
From: deke@ee.rochester.edu (Dikran Kassabian)
Newsgroups: comp.sys.sun
Subject: Trouble starting automounter
Keywords: Miscellaneous
Message-ID: <5069@brazos.Rice.edu>
Date: 16 Feb 90 16:36:04 GMT
Sender: root@rice.edu
Organization: Sun-Spots
Lines: 54
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 9, Issue 50, message 4