Article View: comp.sys.sun
Article #13913Re: passing signal numbers via rexecd
From: ingr!b11!nancy
Date: Mon, 19 Feb 1990 16:42
Date: Mon, 19 Feb 1990 16:42
12 lines
1107 bytes
1107 bytes
Data that is read from the aux channel is the stderr of the command. Data that is written to the aux channel should be a signal number (integer, 4 bytes long) with which rexecd kill()'s the command. Does your command receive signals that you send on the aux port? The version of both rexec() and rcmd() on my BSD4.3 machine works fine. You might want to write a test program that has a signal routine set up. Then you can send its signal number on the aux channel and see if the signal routine is invoked. Nancy Buehmann UUCP: ...!uunet!ingr!b11!nancy Intergraph Corporation Internet: b11!nancy@ingr.com Huntsville, Alabama 35894-0001
Technical Details
Message-ID:
<5205@brazos.Rice.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!rice!sun-spots-requestShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!rice!sun-spots-request From: ingr!b11!nancy@cs.utexas.edu Newsgroups: comp.sys.sun Subject: Re: passing signal numbers via rexecd Keywords: SunOS Message-ID: <5205@brazos.Rice.edu> Date: 19 Feb 90 16:42:09 GMT Sender: news@rice.edu Organization: Sun-Spots Lines: 12 Approved: Sun-Spots@rice.edu X-Refs: Original: v9n45 X-Sun-Spots-Digest: Volume 9, Issue 53, message 2