Sun VMEbus "dummy" card or cable extendor

Article View: comp.sys.sun

Article #13969

#13969

From: Joseph Yip
Date: Fri, 23 Feb 1990 19:42

30 lines
1367 bytes

Sorry for all the confusion. I am going to clarify my previous problem. I
am installing the frame grabber into a Sun 4. The connector is a 9U
(3x32).  The frame grabber is for the Sun VMEbus.

The problem is as follows:
						backplane
						of Sun 4
		| Sun VMEbus			|
		V connector			V

-----------------------------------------------+
		_		-______________+
		-		-	       |
		-		- frame	       |
		-		- grabber      |
		-		-______________+
-----------------------------------------------+
		^		^
		|		|
		+-------+-------+
			|
		space need to be fill in orde to mate the two connectors

I heard that there is a "dummy" card that fill the space and connects the
Sun VMEbus to the card (frame grabber in our case). Also, one can also use
a ribbon cable that brings the two connectors together.

Do you know the part number for this kind of card or cable?

Joseph Yip

Technical Details

Message-ID: <5295@brazos.Rice.edu>

Path: arc1-ca.pugleaf.net!utzoo!censor!geac!torsqnt!jarvis.csri.toronto.edu!cs.utexas.edu!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!censor!geac!torsqnt!jarvis.csri.toronto.edu!cs.utexas.edu!rice!sun-spots-request
From: ycy@walt.cc.utexas.edu (Joseph Yip)
Newsgroups: comp.sys.sun
Subject: Sun VMEbus "dummy" card or cable extendor
Keywords: Hardware
Message-ID: <5295@brazos.Rice.edu>
Date: 23 Feb 90 19:42:55 GMT
Sender: root@rice.edu
Organization: Sun-Spots
Lines: 30
Approved: Sun-Spots@rice.edu
X-Refs:  Original: v9n56
X-Sun-Spots-Digest: Volume 9, Issue 60, message 1