AT board search

Article View: comp.sys.sun

Article #1541

#1541

From: Jeff MacDonald
Date: Mon, 18 Sep 1989 19:32

14 lines
1165 bytes

Help!  I am in dire need of an AT-compatible board which will allow me to
add a parallel and at least two serial ports to a Sun386i.  I prefer a
board which will fit in the bottom (short) slot.  The add-on ports must
not conflict with existing parallel port at 0x378 IRQ7, serial port at
0x3F8 IRQ4, system flop at IRQ6, SCSI at IRQ8, or ethernet at IRQ13.  Most
boards do not provide sufficient jumperability.  A Jameco board I tried
did not generate interrupts reliably.

Any and all help, or pointers to help, greatly appreciated.

Jeff MacDonald ([decvax|ulowell]!cg-atla!jmacdon)
Agfa/Compugraphic Division  200-2-9F
200 Ballardvale, Wilmington MA 01887
(508) 658-0200,  extension 5406

Technical Details

Message-ID: <1616@brazos.Rice.edu>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!uunet!ginosko!gem.mps.ohio-state.edu!wuarchive!mailrus!cornell!uw-beaver!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!ginosko!gem.mps.ohio-state.edu!wuarchive!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: ginosko!cg-atla!jmacdon@uunet.uu.net (Jeff MacDonald)
Newsgroups: comp.sys.sun
Subject: AT board search
Keywords: 386i
Message-ID: <1616@brazos.Rice.edu>
Date: 18 Sep 89 19:32:51 GMT
Sender: root@rice.edu
Organization: Sun-Spots
Lines: 14
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 8, Issue 130, message 8 of 18