SCSI problem with Conner CP-3200

Article View: comp.sys.sun

Article #6540

#6540

From: Ross cartlidge
Date: Wed, 16 Jan 1991 08:25

19 lines
1289 bytes

I installed a Conner CP-3200 200Meg drive as the second internal drive on
an SS1. Initially the system was running 4.0.3 and the drive worked fine.

I then tried to install 4.1 on the new drive.

When I booted off the new drive a got heaps of SCSI read timeouts which
slowed everything down incredibly - however it eventually came up
multi-user.

Does 4.1 use the disk differently to 4.0.3?  Can anyone have any ideas on
what could cause this.

Any help will be greatly appreciated.

PS. Can anyone tell me where I can get some documentation on the CP-3200
    - it was supplied to us as a bare disk- I had to guess how to set the SCSI
    id, and I have no idea what the other jumpers do.

Ross Rodney Cartlidge			    |   rossc@extro.ucc.su.oz.au

Technical Details

Message-ID: <1283@brchh104.bnr.ca>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!cunews!bnrgate!brtph3!brchh104!brchs1!bnr.ca!rice.edu!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!cunews!bnrgate!brtph3!brchh104!brchs1!bnr.ca!rice.edu!sun-spots-request
From: rossc@extro.ucc.su.oz.au (Ross cartlidge)
Newsgroups: comp.sys.sun
Subject: SCSI problem with Conner CP-3200
Keywords: Hardware
Message-ID: <1283@brchh104.bnr.ca>
Date: 16 Jan 91 08:25:53 GMT
Sender: news@brchh104.bnr.ca
Organization: Sun-Spots
Lines: 19
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 10, Issue 20, message 14
X-Note: Submissions: sun-spots@rice.edu, Admin: sun-spots-request@rice.edu