Article View: comp.sys.sun
Article #6618Re: SCSI problem with Conner CP-3200
From: David L. Markowitz
Date: Mon, 21 Jan 1991 17:23
Date: Mon, 21 Jan 1991 17:23
25 lines
1496 bytes
1496 bytes
In comp.sys.sun you write: >I installed a Conner CP-3200 200Meg drive as the second internal drive on >an SS1. Initially the system was running 4.0.3 and the drive worked fine. >I then tried to install 4.1 on the new drive. >When I booted off the new drive a got heaps of SCSI read timeouts which >slowed everything down incredibly - however it eventually came up >multi-user. We use these drives all the time. Make sure that your drive has PROM version 2.03 or later. 1.86 and earlier are known to not work under 4.1 (this has been covered in previous sun-spots). Our distributor upgraded them for us at no charge. |PS. Can anyone tell me where I can get some documentation on the CP-3200 | - it was supplied to us as a bare disk- I had to guess how to set the SCSI | id, and I have no idea what the other jumpers do. Have you asked Conner? Leave the other jumpers alone. David L. Markowitz dav@gtc.com
Technical Details
Message-ID:
<1364@brchh104.bnr.ca>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!cunews!bnrgate!brtph3!brchh104!brchs1!bnr.ca!rice.edu!sun-spots-requestShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!cunews!bnrgate!brtph3!brchh104!brchs1!bnr.ca!rice.edu!sun-spots-request From: dav@genisco.gtc.com (David L. Markowitz) Newsgroups: comp.sys.sun Subject: Re: SCSI problem with Conner CP-3200 Keywords: Hardware Message-ID: <1364@brchh104.bnr.ca> Date: 21 Jan 91 17:23:07 GMT Sender: news@brchh104.bnr.ca Organization: Sun-Spots Lines: 25 Approved: Sun-Spots@rice.edu X-Refs: Original: v9n309 X-Sun-Spots-Digest: Volume 10, Issue 25, message 4 X-Note: Submissions: sun-spots@rice.edu, Admin: sun-spots-request@rice.edu