CDC Wren V on SS2

Article View: comp.sys.sun

Article #7205

#7205

From: Bruce Allen
Date: Sun, 24 Mar 1991 12:32

19 lines
1219 bytes

I am currently upgrading my SS1 to an SS2.  I have run into problems with
the disk, which is an external CDC Wren V 94181 (702 Megs).  The disk
worked fine on the SS1.  On the SS2, I have been unable to read or write
to the disk.  I get the error message

	eps0: SCSI Bus MESSAGE OUT phase parity error

when the parity is jumpered on in the disk, and the error message

	eps0: SCSI Bus MESSAGE IN phase parity error

when the parity is jumpered off.  According to the Wren manual, it can
recognize both Synch and Asynch SCSI.

I would be grateful to anyone who has suceeded in getting a CDC Wren V to
work with an SS2.

Bruce Allen
ballen@csd4.csd.uwm.edu

Technical Details

Message-ID: <2134@brchh104.bnr.ca>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!cunews!bnrgate!brtph3!brchh104!brchs1!bnr.ca!rice.edu!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!cunews!bnrgate!brtph3!brchh104!brchs1!bnr.ca!rice.edu!sun-spots-request
From: ballen@csd4.csd.uwm.edu (Bruce Allen)
Newsgroups: comp.sys.sun
Subject: CDC Wren V on SS2
Keywords: Hardware
Message-ID: <2134@brchh104.bnr.ca>
Date: 24 Mar 91 12:32:00 GMT
Sender: news@brchh104.bnr.ca
Organization: Sun-Spots
Lines: 19
Approved: Sun-Spots@rice.edu
X-Original-Date: 21 Mar 91 23:13:22 GMT
X-Sun-Spots-Digest: Volume 10, Issue 64, message 4
X-Note: Submissions: sun-spots@rice.edu, Admin: sun-spots-request@rice.edu