Setting up an SLC for standalone use.

Article View: comp.sys.sun

Article #7656

#7656

From: David Boles
Date: Sun, 28 Apr 1991 19:20

15 lines
1200 bytes

I am considering the purchase of a 4/20 FM 8 machine for standalone home
use.  I will also be buying a HD and a tape drive for the unit.  Is there
any requirement on the type of HD that I get?  I am wondering what would
happen if I get the SLC, a 1/4" tape drive (60 or 150 mb), and a SCSI HD
(~300 megs) and then try to install the OS.  Will this work?

Also, SunOS 4.0.3 is much cheaper from Sun than 4.1.1.  What would I not
get if I went with the older OS?  

Any and all help/replies are appreciated, thanks !!

David Boles
Applied Research Laboratories
apas611@hermes.chpc.utexas.edu or
dboles@ccwf.utexas.edu

Technical Details

Message-ID: <2710@brchh104.bnr.ca>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!cunews!bnrgate!brchh104!brchs1!bnr.ca!rice.edu!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!cunews!bnrgate!brchh104!brchs1!bnr.ca!rice.edu!sun-spots-request
From: apas611@hermes.chpc.utexas.edu (David Boles)
Newsgroups: comp.sys.sun
Subject: Setting up an SLC for standalone use.
Keywords: Hardware
Message-ID: <2710@brchh104.bnr.ca>
Date: 28 Apr 91 19:20:00 GMT
Sender: news@brchh104.bnr.ca
Organization: Sun-Spots
Lines: 16
Approved: Sun-Spots@rice.edu
X-Original-Date: Fri, 26 Apr 91 05:30:03 GMT
X-Sun-Spots-Digest: Volume 10, Issue 96, message 15
X-Note: Submissions: sun-spots@rice.edu, Admin: sun-spots-request@rice.edu