🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.sun
Article #7882

Re: Memory problem on 3/60

#7882
From: Ajay Patel
Date: Tue, 04 Jun 1991 18:40
40 lines
2648 bytes
In article <2736@brchh104.bnr.ca>, mferrare@physics.adelaide.edu.au (Mark Ferraretto) writes:
|> We have 3 Sun 3/60s running SunOS 4.0.3 that just got upgraded from 4Mb to
|> 8Mb.  Since the upgrade users have noticed that when they edit their files
|> they will find recent changes have not been made, strange characters have
|> been inserted in their files and one case one user got another user's file
|> overwritten on his file.  The w/s boot saying 8192k RAM available but they
|> only test 4Mb when switched on.  The jumpers have been set properly.  It
|> looks like there is some buffering problem because the files appear OK on
|> the file server (Sun 4/280 running 4.0.3).  The filesystems are exported
|> using NFS.
|> 
|> Any ideas?
|>        _             Name  : Mark Ferraretto	   Title: Computing Officer
|>       \  \           Place : Department of Physics and Mathematical Physics
|>  ||     \  \                 University of Adelaide
|> ==========>==>==--   Aarnet: mferrare@physics.adelaide.edu.au

Once the memory has been installed and the jumpers have been reset, you
need to change the EEPROM locations for memory installed and memory tested.
To access EEPROM memory locations:

	1) perform a gracefull shutdown.
	2) at the monitor(>) prompt
	   >q 14 <ret>
	   EEPROM 014: 04?	-- system returns with 4MB installed
	3) at the prompt enter the hex value that matches the total
	   memory installed in the system:
	   EEPROM 014: 04? 10 <ret>  -- for 8 MB installed.
	   EEPROM 015: 04> 10 <space bar> <ret>  -- memory tested during bootup.
	   > (the space bar & return) takes you back to the monitor
	   prompt.

You can go through the process again to verify the changes made.  Finally,
power down.  Then turn power on and reboot. Good Luck!

------------------------I speak for myself ONLY!!----------------------------
|Ajay Patel          | If a listener nods his head |      (513) 865-1789   
|Mead Data Central   | when you're explaining your |       CASE Support
|P.O. Box 933        |    program, wake him up.    |     ajay@meaddata.com
|Dayton, Ohio  45401 |                             |  ...!uunet!meaddata!ajay
Technical Details
Message-ID: <2974@brchh104.bnr.ca>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!cunews!bnrgate!brchh104!brchs1!bnr.ca!rice.edu!sun-spots-request

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!cunews!bnrgate!brchh104!brchs1!bnr.ca!rice.edu!sun-spots-request
From: ajay@meaddata.com (Ajay Patel)
Newsgroups: comp.sys.sun
Subject: Re: Memory problem on 3/60
Keywords: No Digest Subjects in Unmoderated Mode
Message-ID: <2974@brchh104.bnr.ca>
Date: 4 Jun 91 18:40:00 GMT
Sender: news@brchh104.bnr.ca
Organization: Sunspots, Psuedo-Unmoderated
Lines: 40
Approved: sun-spots@rice.edu
X-Original-Date:    9 May 91 18:37:36 GMT