Re: How can I change the SUN logo in the eeprom

Article View: comp.sys.sun

Article #9231

#9231

From: Danielle Heinzer
Date: Wed, 23 Nov 1988 07:23

21 lines
1178 bytes

I did change the Logo and the Banner on my Sun 3/50.  I followed the
information given in the 'PROM User's Manual' Rel. 4.0.  If the addresses
0x290 - 0x48f are filled with 0, you will not see anything. Try to fill
them with 0xff, and you will see a black Logo.  Do you know how to set an
icon (done with iconedit) as Logo ?

     I set 0x20 to 0x12
           0x68-0xb7 to my ascii banner
           0x18f to 0x12
           0x290 - 0x48f to a Logo

Regards,

Danielle Heinzer
ESA Computer Department/Computer Services
European Space Operations Centre
Robert-Bosch-str. 5
6100 Darmstadt
West-Germany
Tel int : 49-6151-886540

Technical Details

Message-ID: <8811141130.AA22318@rice.edu>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!husc6!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!husc6!rice!sun-spots-request
From: ESC1298@ESOC.BITNET (Danielle Heinzer)
Newsgroups: comp.sys.sun
Subject: Re: How can I change the SUN logo in the eeprom
Message-ID: <8811141130.AA22318@rice.edu>
Date: 23 Nov 88 07:23:07 GMT
Sender: usenet@rice.edu
Reply-To: Sun-Spots@Rice.edu
Organization: Rice University, Houston, Texas
Lines: 21
Approved: Sun-Spots@rice.edu
Original-Date: Mon, 14 Nov 88 12:18:33 SET
X-Sun-Spots-Digest: Volume 7, Issue 24, message 5 of 12
X-Issue-Reference: v7n11