Locking down Sun's

Article View: comp.sys.sun

Article #9611

#9611

From: David C. Kovar
Date: Tue, 13 Dec 1988 14:17

21 lines
1563 bytes

We recently installed 10 Sun 386i machines out in a student design studio.
All of the equipment was secured with Anchor Pads. The core of the system
is a large (12" x 12" or there abouts) metal plate that is attached to the
surface of a large object with a "super-glue" type of adhesive. Mounting
brackets are then attached to the monitor and system cabinet and these
brackets are secured to the plates with a rod and key mechanism. It would
take a lot of force to remove the systems from the drafting tables. The
major drawback to the system appears when you move some equipment to a new
location. You're left with an ugly metal plate attached to your tables.
Anchor Pad claims that they have a solvent that will remove them but we've
never bothered.

If someone wants your equipement they're going to get it, but Anchor Pads
make it a lot more difficult.

Anchor Pad - (617) 868-8370. (I'm sure they have offices elsewhere, but
this is the one we deal with.)

-David Kovar
 Technical Consultant
 Harvard University

Technical Details

Message-ID: <8812011822.AA19796@icarus>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!uunet!ncrlnk!ncr-sd!hp-sdd!hplabs!ucbvax!bloom-beacon!mit-eddie!uw-beaver!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!ncrlnk!ncr-sd!hp-sdd!hplabs!ucbvax!bloom-beacon!mit-eddie!uw-beaver!rice!sun-spots-request
From: daedalus!kovar%husc4@talcott.harvard.edu (David C. Kovar)
Newsgroups: comp.sys.sun
Subject: Locking down Sun's
Message-ID: <8812011822.AA19796@icarus>
Date: 13 Dec 88 14:17:38 GMT
Sender: usenet@rice.edu
Organization: Rice University, Houston, Texas
Lines: 21
Approved: Sun-Spots@rice.edu
Original-Date: Thu, 01 Dec 88 13:22:54 -0500
X-Sun-Spots-Digest: Volume 7, Issue 50, message 9 of 9