SCSI tape: rst0 or rst8?

Article View: comp.sys.sun

Article #9751

#9751

From: Sharon Goodall
Date: Fri, 16 Dec 1988 12:12

12 lines
1076 bytes

What is the difference between /dev/rst0 and /dev/rst8 on Suns?  Does one
have a higher storage capacity than the other when using tar or dump?

Sharon Goodall
goodall@mimsy.umd.edu
University of Maryland, College Park

[[ The difference is very similar to the different between /dev/rmt0 and
/dev/rmt8.  0 is a "lower density" device, requiring more tape to fit the
same amount of information but less prone to bad spots on the media.  8 is
a "higher density" device.  For the rst device, 0 uses QIC-11 format and 8
uses QIC-24.  --wnl ]]

Technical Details

Message-ID: <8812091542.AA01449@brillig.umd.edu>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!rutgers!gatech!uflorida!mailrus!cornell!uw-beaver!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!rutgers!gatech!uflorida!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: goodall@brillig.umd.edu (Sharon Goodall)
Newsgroups: comp.sys.sun
Subject: SCSI tape: rst0 or rst8?
Message-ID: <8812091542.AA01449@brillig.umd.edu>
Date: 16 Dec 88 12:12:14 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 12
Approved: Sun-Spots@rice.edu
Original-Date: Fri, 9 Dec 88 10:42:55 EST
X-Sun-Spots-Digest: Volume 7, Issue 59, message 20 of 21