getxfile I/O error (was: Sun problem)

Article View: comp.sys.sun

Article #9765

#9765

From: Dale Carstensen
Date: Tue, 20 Dec 1988 06:06

6 lines
921 bytes

The only tricky part about this message is that it is not obvious that "x"
means "swap."  So, you probably are getting a disk (or nd on 3.X, or NFS
on 4.0) error in the swap area for the workstation that gets the error.
If you have a Ciprico driver older than about January 1988 and the
workstation is a client with its swap space on a Ciprico-controlled disk,
you may be encountering a bug in the driver, though.

Technical Details

Message-ID: <8812112234.AA10789@vetch.c3.lanl.gov>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!husc6!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!husc6!rice!sun-spots-request
From: dlc@vetch.c3.lanl.gov (Dale Carstensen)
Newsgroups: comp.sys.sun
Subject: getxfile I/O error (was: Sun problem)
Message-ID: <8812112234.AA10789@vetch.c3.lanl.gov>
Date: 20 Dec 88 06:06:37 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 6
Approved: Sun-Spots@rice.edu
Original-Date: Sun, 11 Dec 88 15:34:18 MST
X-Sun-Spots-Digest: Volume 7, Issue 63, message 5 of 11