Re: SCSI tape: rst0 or rst8

Article View: comp.sys.sun

Article #9918

#9918

From: Greg Onufer
Date: Fri, 30 Dec 1988 00:56

17 lines
1333 bytes

goodall@brillig.umd.edu (Sharon Goodall):
> [[ ...   For the rst device, 0 uses QIC-11 format and 8
> uses QIC-24.  --wnl ]]

Some Sun-2's can use QIC-24 and some cannot.  It depends on the tape drive
type and the tape controller.  There is a Sun document on 1/4" tape drives
that should be read by those who want to know more about the tapes and
formats.  It also describes which machines can use the two formats.  The
title is something like "A Tutorial on 1/4" Tape Drives".  If I recall
correctly, it also goes into care and feeding of the devices.  It is not a
technical paper-- it is oriented towards those who just need to know the
basics.

-greg
-- 
Greg Onufer   //  Focus Semiconductor  //     University of the Pacific
  exodus@cheers.uucp (daver!cheers!exodus@Sun.COM) 	415-965-0604

Technical Details

Message-ID: <521@mfgfoc.uucp>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request

References: <8812091542.AA01449@brillig.umd.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!watmath!clyde!att!osu-cis!tut.cis.ohio-state.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: exodus@mfgfoc.uucp (Greg Onufer)
Newsgroups: comp.sys.sun
Subject: Re: SCSI tape: rst0 or rst8
Message-ID: <521@mfgfoc.uucp>
Date: 30 Dec 88 00:56:22 GMT
References: <8812091542.AA01449@brillig.umd.edu>
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 17
Approved: Sun-Spots@rice.edu
Original-Date: 18 Dec 88 01:06:57 GMT
X-Sun-Spots-Digest: Volume 7, Issue 78, message 2 of 10

Reply to Parent Message