Re: telnetting to bridge cs/1

Article View: comp.sys.sun

Article #9941

#9941

From: Clement Vaillancourt
Date: Fri, 30 Dec 1988 07:38

15 lines
1380 bytes

I have 23 of those CS/1 CS/100 CS/200. In one of them I configure one port
as a host at 9600 bauds, giving it a name and an internet number. I
connect this port to an other port configure as a terminal port with a
cable of 3 wires 2,3,7 on one side connected to 3,2,7 on the other side.
It is not the most elegant thing but it work fine. Put this given name in
your sun hosts files in /etc and do an rlogin to it.  You will get a CS/1>
prompt. Then you can set priv=gnm and do all the configuration you want
and you can also do a remote command to any other box you have to
configure the same way.

   Clement Vaillancourt,
   Institut de Recherche d'Hydro-Quebec, (Hydro-Quebec Research Institute)
   1800   Montee  Ste-Julie,   Varennes,   P. Quebec,   Canada,   J0L 2P0
   Tel.:   514-652-8238           Fax.:  514-652-8180
UUCP:   ...ireqs3!vaillancourt  or  vaillancourt@ireqs3.uucp

Technical Details

Message-ID: <8812201353.AA00631@c31.>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!attcan!uunet!lll-winken!lll-lcc!ames!mailrus!ukma!husc6!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!attcan!uunet!lll-winken!lll-lcc!ames!mailrus!ukma!husc6!rice!sun-spots-request
From: vaillan@ireqs3.UUCP (Clement Vaillancourt)
Newsgroups: comp.sys.sun
Subject: Re: telnetting to bridge cs/1
Message-ID: <8812201353.AA00631@c31.>
Date: 30 Dec 88 07:38:01 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 15
Approved: Sun-Spots@rice.edu
Original-Date: Tue, 20 Dec 88 08:53:22 EST
X-Sun-Spots-Digest: Volume 7, Issue 80, message 1 of 12