SS2 data transfer overrun

Thread View: comp.sys.sun

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Brien L. Wheeler Thu, 27 Jun 1991 20:22

#8658

Author: Brien L. Wheeler
Date: Thu, 27 Jun 1991 20:22

35 lines
1892 bytes

We are running a SPARCstation 2 with SunOS 4.1.1 Rev B.  Our SCSI configuration is this:

    esp0 - Emulex SCSI controller
        sd0 - Internal Maxtor 207MB - SCSI ID 3
        sd3 - External Sun 669MB    - SCSI ID 0
        st0 - External QIC-150      - SCSI ID 4
        sr0 - External CD-ROM       - SCSI ID 6
        ss0 - External Scanner      - SCSI ID 5

Occasionally the system will spit out error messages of a 'data transfer overrun' from the Maxtor 207MB:

esp0:	data transfer overrun
	State=DATA Last State=DATA_DONE
	Latched stat=0x10<XZERO> intr=0x10<BUS> fifo 0x60
	last msg out: <unknown msg 0xff>; last msg in: COMMAND COMPLETE
	DMA csr=0x94400010<INTEN>
	addr=ff072000 last=ff070000 last_count=2000
	Cmd dump for Target 3 Lun 0:
	cdb=[ 0xa 0x4 0xf9 0xe8 0x10 0x0 0x0 0x0 0x0 0x0 ]
	pkt_state 0xf<XFER,CMD,SEL,ARB> pkt_flags 0x0 pkt_statistics 0x2
	cmd_flags=0x27 cmd_timeout 35
	Mapped Dma Space:
		Base = 0xff070000 Count = 0x2000
	Transfer History:
		Base = 0xff070000 Count = 0x2000
sd0:    SCSI transport failed: reason 'data_ovr': retrying command
esp0:	Target 3 now Synchronous at 4.0 mb/s max transmit rate

Does anyone have any ideas on why this is happening?

-- 
     Brien L. Wheeler             |  I don't speak for MITRE, and they
     wheeler@bistromath.mitre.org |  don't speak for me.

"When I think back on all the crap I learned in high school..."

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads