🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.tahoe
Article #72

Re: vdformat

#72
From: John McCurry
Date: Thu, 12 Nov 1987 20:58
52 lines
2735 bytes
In article <8711101503.AA17279@joey.cs.Buffalo.EDU>, kensmith@CS.BUFFALO.EDU (Ken Smith) writes:
> 
> Does anybody have a vdformat that works with the 515M CDC drives?

I asked around and got the following information:

The rev 3.5 vdformat tape will work with all of the drive types including
the 515.  This version comes with CCI's System V release but we use it on
our Berekely systems too (it's standalone).

There is a known problem with it so our tech-support people asked me to
pass this along too:

		-----------------------
   There is a problem with the 3.5 vdformat program. The 3.5 vdformat
   program was included in the 2.21 release. This problem does not
   effect system performance at the UNIX or application level.

   The problem only shows up when running PITS after doing a verify of a
   3.5 vdformated Maxtor 380 MB drive. When executing the verify option,
   of vdformat, the program zero's out the pointer, in the ID block, to
   the address of the maintance cylinder that PITS uses to test the drive.
   Then when you run the disk subsystem test of PITS the diagnostics will
   fail with the following error message: Cannot identify drive(s) The
   program then returns you to the main PITS menu. 

   If you have a drive that experiences this problem you can rewrite the
   ID block by using the Correct option in vdformat.

   The procedure is as follows:

   1. Boot vdformat and when the operation prompt appears type:  "Correct".
      When the operation prompt comes back type "start".

   2. You should now have the location prompt. Type "ID" and answer the
      questions. Type "start", it is now re-writing the ID block.

   This problem will be fixed in the patch release 2.21.03 which will be
   released in 2 months.
		-----------------------

Ken, and any others in the same boat, I hope that this is of some help.
Please let us know - e-mail, telepathy, whatever - if you have any
problems getting the tape or if you have problems using it.

<standard disclaimer stuff>
				John  (714)458-7282

-- 
"Juglito ergo sum."  - the Flying Karamozov Brothers
John J. McCurry				uunet!ccicpg!leo!john
Computer Consoles Inc. CPD, Irvine, Ca.
Technical Details
Message-ID: <1503@leo.UUCP>
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!ccicpg!leo!john
References: <8711101503.AA17279@joey.cs.Buffalo.EDU>

Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!ccicpg!leo!john
From: john@leo.UUCP ( John McCurry)
Newsgroups: comp.sys.tahoe
Subject: Re: vdformat
Message-ID: <1503@leo.UUCP>
Date: Thu, 12-Nov-87 15:58:25 EST
Article-I.D.: leo.1503
Posted: Thu Nov 12 15:58:25 1987
Date-Received: Sat, 14-Nov-87 20:44:20 EST
References: <8711101503.AA17279@joey.cs.Buffalo.EDU>
Organization: CCI CPD (Advanced Development), Irvine CA
Lines: 52
Summary: use rev 3.5 of vdformat