Reset problem

Article View: comp.sys.ti.explorer

Article #404

Back to comp.sys.ti.explorer Previous Next

#404

From: Terry Escamilla
Date: Mon, 05 Jun 1989 19:00

16 lines
1188 bytes

I've just tried another trick that used to work.  I took out the
microExplorer board, removed the 8 MB memory expansion, and reseated
the microExplorer board.  The system worked fine.  I also changed 
and used a different NuBus slot.  Then I reseated the memory expansion
board and tried again.  The system is working fine now.  If the reset
problem arises again, I'll yell for help again.  

Our memory expansion board is only seated on the mother board using
the expansion connector.  We sent the board in once before, but when
it returned from TI, it didn't have the support brackets which 
were originally shipped with the expansion board.  Does anyone know
how/where to get support pins/brackets for the mother board/memory
expansion board for the microExplorer.

terry@cssun.tamu.edu

Technical Details

Message-ID: <8906051900.AA18760@cssun.tamu.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!ucbvax!CSSUN.TAMU.EDU!terry

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!ucbvax!CSSUN.TAMU.EDU!terry
From: terry@CSSUN.TAMU.EDU (Terry Escamilla)
Newsgroups: comp.sys.ti.explorer
Subject: Reset problem
Message-ID: <8906051900.AA18760@cssun.tamu.edu>
Date: 5 Jun 89 19:00:48 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: inet
Organization: The Internet
Lines: 16