Info on MicroExplorer

Thread View: comp.sys.ti.explorer

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by R. Peter Bonasso Tue, 29 Sep 1992 19:51

#307

Author: R. Peter Bonasso
Date: Tue, 29 Sep 1992 19:51

18 lines
1190 bytes


I'm one of the last purchasers of a uExp relesase 6.1. I have 8 MB of uExp
memory. I'm trying to find out if any outfit supports increasing the amount of
memory I have to say 16 MB. Anyone have any info?

I'm also interested if anyone has a patch to allow the uExp to use more than
one serial port on the Mac II. My application is robot control and I need to
get sensor info on one port and send control info thru the other port. I can
always get into the source but if someone has it done already, it'd save me
some time.

Finally, does anyone have a set of manual change pages from release 6.0 to
release 6.1? My release 6.0 manuals seem okay, but I dread the day I will need
to reference some detail about 6.1. TI has chucked all their spare manuals.


Pete

Re: Info on MicroExplorer

#308

Author: Richard Acuff
Date: Tue, 29 Sep 1992 21:43

5 lines
693 bytes

The mX has 4MB on the main processor, plus an optional 4MB or 8MB on a sister
board.  Though the 4MB and 8MB memory boards look a lot alike, I don't know that
you can get away with just plugging in chips to go from 4 to 8.  I suspect not.

        -- Rich

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads