Re: Transputer reset

Article View: comp.sys.transputer

Article #1042

Back to comp.sys.transputer Previous Next

#1042

From: David Boreham
Date: Mon, 15 Oct 1990 10:42

13 lines
1096 bytes

In article <8972@latcs1.oz.au> kevin@latcs1.oz.au (Kevin James Bertram) writes:
>
>I ask this because my experience says it doesn't. At least with the T8's
>and T414's. BUT T400 do clear their ERROROUT line on reset. So which is
>true? Is it luck that the T400's do reset ERROROUT?

Jumped the gun a bit on the previous reply. All new devices which have
breakpointing features (T225,415,400,805) DO reset the error flag
when the hardware is reset. Other devices (T800, T414, 222) DO not.

David Boreham, INMOS Limited | mail(uk): davidb@inmos.co.uk or ukc!inmos!davidb
Bristol,  England            |     (us): uunet!inmos.com!davidb
+44 454 616616 ex 547        | Internet: davidb@inmos.com

Technical Details

Message-ID: <11887@ganymede.inmos.co.uk>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mcsun!ukc!inmos!brac!davidb

References: <8972@latcs1.oz.au>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mcsun!ukc!inmos!brac!davidb
From: davidb@brac.inmos.co.uk (David Boreham)
Newsgroups: comp.sys.transputer
Subject: Re: Transputer reset
Keywords: reset
Message-ID: <11887@ganymede.inmos.co.uk>
Date: 15 Oct 90 10:42:49 GMT
References: <8972@latcs1.oz.au>
Sender: news@inmos.co.uk
Reply-To: davidb@inmos.co.uk (David Boreham)
Organization: none
Lines: 13

Reply to Parent Message