Re: HELP......on OCCAM!!!!!

Article View: comp.sys.transputer

Article #1208

Back to comp.sys.transputer Previous Next

#1208

From: asskleong
Date: Thu, 08 Oct 1992 09:00

28 lines
1368 bytes

In article <1992Sep29.213705.3456@memstvx1.memst.edu>, yhsim@memstvx1.memst.edu writes:
> 	Can someone please send me some info about OCCAM?  Any references
> would  be appreciated?
> 
        What kind of information you are looking for ?
        Basically OCCAM is one of the languages that you can use to
program on the transputers.  It is extremely powerful in dealing with
the channel communication and the protocol for the communications 
between the transputers.

        For more information, you may be interested in the following
books :
 	A TUTORIAL INTRODUCTION TO OCCAM PROGRAMMING
 	   -- Dick Pountain and David May

 	OCCAM 2 REFERENCE MANUAL
	  -- C.A.R. Hoare

 	and also some of the other publications by INMOS LTD.

        You are welcome.
> 	Thanks a lot!!
> 
> Yan Sim
Happy reading
Soon Khing Leong

>

Technical Details

Message-ID: <1992Oct8.170031.1@ntuvax.ntu.ac.sg>

Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!wupost!darwin.sura.net!jvnc.net!nuscc!ntuix!ntuvax.ntu.ac.sg!asskleong

References: <1992Sep29.213705.3456@memstvx1.memst.edu>

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.transputer
Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!wupost!darwin.sura.net!jvnc.net!nuscc!ntuix!ntuvax.ntu.ac.sg!asskleong
From: asskleong@ntuvax.ntu.ac.sg
Subject: Re: HELP......on OCCAM!!!!!
Message-ID: <1992Oct8.170031.1@ntuvax.ntu.ac.sg>
Lines: 28
Sender: news@ntuix.ntu.ac.sg (USENET News System)
Nntp-Posting-Host: v9000.ntu.ac.sg
Organization: Nanyang Technological University - Singapore
References: <1992Sep29.213705.3456@memstvx1.memst.edu>
Date: Thu, 8 Oct 1992 09:00:31 GMT

Reply to Parent Message