Re: Using INMOS ANSI C debugger

Article View: comp.sys.transputer

Article #1321

Back to comp.sys.transputer Previous Next

#1321

From: Louis L. Whitcomb
Date: Thu, 10 Jan 1991 20:06

28 lines
1854 bytes

In article <1991Jan10.121337.203@cs.hope.edu> jipping@cs.hope.edu
(Mike Jipping) writes:

   ... How do I force a process to be a low
   priority process.  I'm aching to do breakpoint debugging...

Greetings:

  All processes are low priority unless you specify them to be high
priority at either the configuration level or when explicitly running
a process with the library functions (e.g. ProcRunHigh and
ProcRunLow).

  To interactively debug a program on a network of B011's attached to a
B004 in a pc, for example, use the command line "idebug filename.btl
/b /2 /sr" to run the network program under the debugger.  Then follow
the instructions in Section 8.10 of the Inmos C toolset user manual to
set inital breakpoints, run the program, resume after breakpointing,
etc. It works well.
 
  The Best,

      -Louis.
--
Louis L. Whitcomb              llw@corwin.eng.yale.edu    ph: (203) 432-4237  
Yale Robotics Laboratory                                  fx: (203) 432-7481 
Department of Electrical Engineering, 1968 Yale Station, New Haven, CT 06520

Technical Details

Message-ID: <LLW.91Jan10150640@corwin.eng.yale.edu>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!thunder.mcrcim.mcgill.edu!snorkelwacker.mit.edu!bu.edu!rpi!zaphod.mps.ohio-state.edu!samsung!cs.utexas.edu!yale!cs.yale.edu!corwin.eng.yale.edu!llw

References: <1991Jan8.201733.29037@netnews.whoi.edu> <LLW.91Jan9102814@corwin.eng.yale.edu> <1991Jan10.121337.203@cs.hope.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!thunder.mcrcim.mcgill.edu!snorkelwacker.mit.edu!bu.edu!rpi!zaphod.mps.ohio-state.edu!samsung!cs.utexas.edu!yale!cs.yale.edu!corwin.eng.yale.edu!llw
From: llw@corwin.eng.yale.edu (Louis L. Whitcomb)
Newsgroups: comp.sys.transputer
Subject: Re: Using INMOS ANSI C debugger
Message-ID: <LLW.91Jan10150640@corwin.eng.yale.edu>
Date: 10 Jan 91 20:06:40 GMT
References: <1991Jan8.201733.29037@netnews.whoi.edu>
 <LLW.91Jan9102814@corwin.eng.yale.edu>
 <1991Jan10.121337.203@cs.hope.edu>
Sender: news@cs.yale.edu
Organization: Yale University, Center for Systems Sciences
Lines: 28
Nntp-Posting-Host: corwin.eng.yale.edu
In-reply-to: jipping@cs.hope.edu's message of 10 Jan 91 12:13:37 GMT

Reply to Parent Message