Help needed in SCSI target mode driver

Article View: comp.sys.transputer

Article #1862

Back to comp.sys.transputer Previous Next

#1862

From: Chia Chao
Date: Wed, 26 Jun 1991 15:23

18 lines
1167 bytes

Hi,

I am working on a project that requires the use of a Mass Storage
Controller (MSC) board made by Parsytec from Germany. This borad has a
INMOS T-800 Transputer chip, 4 Mbytes of memory, and a Western Digital
WD33C93 SCSI protocol controller chip. 

Parsytec only has the SCSI initiator mode driver available. Since we
like to make the MSC board to act as a SCSI target, I need to write
the driver. If you have done something similar, i.e. wrote a SCSI
target mode driver, I like very much to hear about your experience,
tools needed, ticks, to use, problems to avoid, references to other
sources, etc. If you could share with me your source code, that would
be great! Thanks in advance for your help.

Chia Chao
HP Labs
cchao@hplabs.hp.com

Technical Details

Message-ID: <1991Jun26.152308.27814@cello.hpl.hp.com>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!hplabs!cello!cchao

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!hplabs!cello!cchao
From: cchao@cello.hpl.hp.com (Chia Chao)
Newsgroups: comp.sys.transputer,comp.periphs.scsi,hp-factory.std.scsi
Subject: Help needed in SCSI target mode driver
Message-ID: <1991Jun26.152308.27814@cello.hpl.hp.com>
Date: 26 Jun 91 15:23:08 GMT
Organization: Hewlett Packard Labs
Lines: 18