Transputers under Microsoft Windows...

Article View: comp.sys.transputer

Article #1899

Back to comp.sys.transputer Previous Next

#1899

From: John Dallaway
Date: Mon, 25 Jan 1993 13:26

16 lines
1239 bytes

I will shortly be taking delivery of a Transputer-based motor control board
complete with an MS-DOS based user interface. I am completely new to
Transputers and was wondering if anyone has any experience in communicating
with Transputers under Microsoft Windows. I hope to drive the Transputer card
using a Windows DLL. Are there any Windows-compatible Transputer communications
libraries and/or drivers available?

Any information would be greatly appreciated.

--
Dr John L Dallaway                                     Voice: +44 223 332812
Cambridge University Engineering Department              Fax: +44 223 332662
Trumpington Street
CAMBRIDGE
CB2 1PZ
UK                                                    E-mail: jld@eng.cam.ac.uk

Technical Details

Message-ID: <1993Jan25.132624.14330@infodev.cam.ac.uk>

Path: arc1-ca.pugleaf.net!sparky!uunet!pipex!warwick!pavo.csi.cam.ac.uk!news

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.transputer
Path: arc1-ca.pugleaf.net!sparky!uunet!pipex!warwick!pavo.csi.cam.ac.uk!news
From: jld@eng.cam.ac.uk (John Dallaway)
Subject: Transputers under Microsoft Windows...
Message-ID: <1993Jan25.132624.14330@infodev.cam.ac.uk>
Keywords: Windows, Transputers, Interrupts
Sender: jld@eng.cam.ac.uk (John Dallaway)
Nntp-Posting-Host: millypc.eng.cam.ac.uk
Organization: Department of Engineering, University of Cambridge, UK
Date: Mon, 25 Jan 1993 13:26:24 GMT
Lines: 16