IMS B437, problem

Article View: comp.sys.transputer

Article #1909

Back to comp.sys.transputer Previous Next

#1909

From: Michael Hall
Date: Wed, 27 Jan 1993 16:57

9 lines
1151 bytes

We have bought an IMS 437display TRAM. I have some problem to get it to work with out monitor. The monitor is an ordinary TV-montior (standard PAL system). The problem is that i can't initialize the hardware correct.
My question is, are there anybody who are using one of this graphics board with an TV-montior. If so, what are the correct parameter block that shall be used to initialize the harware?


--
Michael Hall                          |  email     :  michael@isy.liu.se
Linköping University                  |  voice     :  +46 (013) 28 26 52
Department of Electrical Engineering  |  telefax   :  +46 (013) 28 25 99
S-581 83 Linköping, Sweden            |

Technical Details

Message-ID: <1993Jan27.165749.330@isy.liu.se>

Path:

arc1-ca.pugleaf.net!sparky!uunet!charon.amdahl.com!amdahl!rtech!sgiblab!spool.mu.edu!yale.edu!newsserver.jvnc.net!gmd.de!Germany.EU.net!mcsun!sunic!liuida!isy!isy.liu.se!michael

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.transputer
Path: arc1-ca.pugleaf.net!sparky!uunet!charon.amdahl.com!amdahl!rtech!sgiblab!spool.mu.edu!yale.edu!newsserver.jvnc.net!gmd.de!Germany.EU.net!mcsun!sunic!liuida!isy!isy.liu.se!michael
From: michael@isy.liu.se (Michael Hall)
Subject: IMS B437, problem
Message-ID: <1993Jan27.165749.330@isy.liu.se>
Sender: news@isy.liu.se (Lord of the News)
Reply-To: michael@isy.liu.se
Organization: Linkoping University
Date: Wed, 27 Jan 1993 16:57:49 GMT
Lines: 10