Getting started cheaply

Article View: comp.sys.transputer

Article #2822

Back to comp.sys.transputer Previous Next

#2822

From: Jeffrey Davis
Date: Sun, 18 Feb 1990 04:05

16 lines
1324 bytes

Hello,
	I am interested in getting involved in the wonderful world 
of transputing but not if it is too expensive (this is all going 
to be out of my own pocket.)  
	What I am interested in is a less expensive means of getting 
started.  I have a 20MHz Mylex based 386 at home with a spare 32bit slot
(as well as several 16bit slots) which I would like to add a transputer 
board to. I am aware of the Microway transputer boards but they are a 
little out of my price range.  
	Has anyone out there either built their own or found a cheaper 
source for such things.  I have enough electronics experience that I 
think I could put one together but not enough to design one myself.  
					Thanks,
					Jeff Davis
-- 
JCDavis@lbl.gov  Center for X-ray Optics, Lawrence Berkeley Labs

Technical Details

Message-ID: <4894@helios.ee.lbl.gov>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!umich!samsung!zaphod.mps.ohio-state.edu!usc!ucsd!helios.ee.lbl.gov!ux3.lbl.gov!davis

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!umich!samsung!zaphod.mps.ohio-state.edu!usc!ucsd!helios.ee.lbl.gov!ux3.lbl.gov!davis
From: davis@ux3.lbl.gov (Jeffrey Davis)
Newsgroups: comp.sys.transputer
Subject: Getting started cheaply
Keywords: inexpensive transputer
Message-ID: <4894@helios.ee.lbl.gov>
Date: 18 Feb 90 04:05:02 GMT
Sender: usenet@helios.ee.lbl.gov
Reply-To: JCDavis@lbl.gov (Jeffrey Davis)
Organization: Lawrence Berkeley Laboratory, Berkeley
Lines: 16
X-Local-Date: 17 Feb 90 20:05:02 PST