Transputer based frame capture

Article View: comp.sys.transputer

Article #715

Back to comp.sys.transputer Previous Next

#715

From: Mike Walma
Date: Tue, 05 Jun 1990 13:10

17 lines
1051 bytes

We are interested in any information about frame capture and/or display
hardware based on, or compatible with, Transputers.

We are interested in everything from capture or display Trams, right up
to board level products aimed at the AT clone market.  Our needs range
from resolutions as low as 640x480 up to in the range of 1280x1024.
Both colour and grey scale are of interest.

What I am after is a survey of what is available, so anything more
substantial then a rumour would be appreciated.  If there is sufficent
interest, I will post a summary.

Thanks in advance.

-- 
Mike Walma   -- Focus Systems -- Waterloo, Ontario
               watmath!focsys!mike  (519) 746-4918

Technical Details

Message-ID: <1990Jun5.131005.17916@focsys.uucp>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!watserv1!maytag!focsys!mike

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.transputer
Path: arc1-ca.pugleaf.net!utzoo!utgpu!watserv1!maytag!focsys!mike
From: mike@focsys.uucp (Mike Walma)
Subject: Transputer based frame capture
Message-ID: <1990Jun5.131005.17916@focsys.uucp>
Reply-To: mike@focsys.UUCP (Mike Walma)
Organization: Focus Automation Systems, Waterloo, Ontario.
Date: Tue, 5 Jun 90 13:10:05 GMT
Lines: 17