Re: I/O calls on the transputer.

Article View: comp.sys.transputer

Article #839

Back to comp.sys.transputer Previous Next

#839

From: Paul Fellows
Date: Tue, 31 Jul 1990 12:10

30 lines
1470 bytes

> This I/O benchmark iocall.c was executed on different systems:
>
> 1) Sun 4/110
> 2) Sun 3/160
> 3) INMOS's T800 TRAM in a B411 module on INMOS's B014 transputer board using
>    their parallel C compiler.

> The results I got in terms of time taken on each system are:

> 1) Sun 4/110            0.067 sec
> 2) Sun 3/160            0.133 sec
> 3) T800 on B014        31.604 sec


> Does anyone have any ideas as how to improve the performance on transputers?


> Vandana Rungta         vandana@multi.ee.usu.edu

Use an IMS B422 SCSI Tram with a fast SCSI disk.

This will give you a sustained IO performance rate of 1.2 MBytes per second for
reads and 1.5 MBytes per second for writes for large data transfers.

(Reads are slower because the IMS B422 uses an IMS T222 which of course does
not have the improved links of the T425 and T80X).

Paul Fellows, INMOS Limited  | mail(uk): paulf@inmos.co.uk or ukc!inmos!paulf
Bristol,  England            |     (us): uunet!inmos.com!paulf
+44 454 616616 ex 547        | Internet: paulf@inmos.com

Technical Details

Message-ID: <9031@ganymede.inmos.co.uk>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mcsun!ukc!inmos!braa!paulf

References: <9007262052.AA01490@multi.ee.usu.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!mcsun!ukc!inmos!braa!paulf
From: paulf@braa.inmos.co.uk (Paul Fellows)
Newsgroups: comp.sys.transputer
Subject: Re: I/O calls on the transputer.
Message-ID: <9031@ganymede.inmos.co.uk>
Date: 31 Jul 90 12:10:14 GMT
References: <9007262052.AA01490@multi.ee.usu.edu>
Sender: news@inmos.co.uk
Reply-To: paulf@inmos.UUCP (Paul Fellows)
Organization: none
Lines: 30

Reply to Parent Message