3L parallel compiler and link switch

Thread View: comp.sys.transputer

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Hsin Chia Fu Wed, 07 Nov 1990 00:07

#1081

Author: Hsin Chia Fu
Date: Wed, 07 Nov 1990 00:07

38 lines
2024 bytes

In the message  <9010091422.AA23544@theory.TN.CORNELL.edu>:

>>Refering to your questions about the 3L Parallel Fortran Compiler and
>>the Processor-Farming, I want to suggest two possible solutions:
>>(I'm not using Fortran, but 3L Parallel C; so it should work the same!)
>>
>>        1. Is there an C004-Linkswitch on your Transputerboard ?
>>                If so, the flood-fill-configurer will not work !
>>                He tries to boot a worker-task into the C004 and destroys
>>                the link-connection-programming. In this case, you have to
>>                use the static configurer instead. (If you have more
>>                questions about how to use the static configurer with
>>                master, worker and the frouter, please ask again!)
>>
>>
>>These were my experiences with the 3L-flood-fill-configurer, so I hope this
>>helps.


I would like to see how to use the static configurer with master, worker
and the frouter.

In addition, any one out there would tell me the e-mail address or the
post address of the user service of 3L parallel C compilier.

Greeting and thanx in advance

H.C. Fu

Date sent:  7-NOV-1990 08:05:38
------------------------------------------------------------------------------
Professor H.C. Fu                 Bitnet: hcfu@twnctu01.bitnet
Dept. of Computer Engineering   Internet: hcfu%twnctu01.bitnet@cunyvm.cuny.edu
National Chiao-Tung University     Voice: 886-35-712121
Hsinchu, Taiwan, 30050               Fax: 886-35-724176
Republic of China
------------------------------------------------------------------------------

Re: 3L parallel compiler and link switch

#1085

Author: Dzaharudin Mansor
Date: Thu, 08 Nov 1990 05:48

19 lines
1075 bytes

In article <9011070012.AA15668@theory.TN.CORNELL.EDU>, HCFU@TWNCTU01.BITNET (Hsin Chia Fu) writes:

     ..... deleted ........

> I would like to see how to use the static configurer with master, worker
> and the frouter.

	The 3L Parallel Fotran manual has a pretty good example
	that could start you off.
> 
> In addition, any one out there would tell me the e-mail address or the
> post address of the user service of 3L parallel C compilier.
> 

	In my previous problem, 3L has been helpful.
	Try Marion at the following e-mail address: 
	     mmp%threel.co.uk@cs.heriot-watt.ac.uk 

-dzahar-

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads