Meiko CS Tools question

Thread View: comp.sys.transputer

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Stefan Schimpf Tue, 29 Sep 1992 11:45

#1236

Author: Stefan Schimpf
Date: Tue, 29 Sep 1992 11:45

23 lines
1563 bytes

Is it possible on a Meiko MK 255 board with the Meiko CS Tools 1.15
software package to use all the 4 links of a transputer as
(bidirectional) hardchannels and do the whole communication using the
low-level primitives cread(), cwrite()?

I've been trying to set up processes that way, but without success:
there were always 2 Links needed for "datalinks" of CSN Processes, in
spite of the fact that my processes did not use virtual channel
communication. Even booting a process which did nothing at all needed
a manually set up CSN connection, without manually set up CSN
connection booting failed with an error message.

Who can help? Thanks in advance.

 ______________________________________________________________________

 Stefan Schimpf                             phone: (+49 711) 7816 409    
 Universitaet Stuttgart                       fax: (+49 711) 780 1044 
 Institut fuer Informatik
 Breitwiesenstr. 20-22
 7000 Stuttgart 80
 Germany                          schimpf@informatik.uni-stuttgart.de
 ______________________________________________________________________

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads