🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: comp.sys.transputer
2 messages
2 total messages Started by Gerald C. Johns Mon, 25 Apr 1988 15:22
Transputer Development Cards
#2049
Author: Gerald C. Johns
Date: Mon, 25 Apr 1988 15:22
25 lines
944 bytes


Does anyone have a list of vendors of transputer development
systems?  I have the INMOS literature, but would like to know
what alternatives may exist.

Our host environment could be an IBM PC/AT, a VME-bus, or
a microVAX.

If you have any experience with transputer development cards
from INMOS or any other vendor, your comments would be
welcomed.


					Gerald C. Johns
					Washington University
					Computer Systems Laboratory
					724 S. Euclid Ave.
					St. Louis, MO 63110
					(314) 362-3119

ARPA:	gerald@wuibc.wustl.EDU
BITNET:	gerald@wuibc.wustl
UUCP:	gerald@wuibc.UUCP  or   ..!ihnp4!wuibc!gerald
Re: Transputer Development Cards
#2051
Author: Hartmut Semken
Date: Fri, 29 Apr 1988 03:57
16 lines
1108 bytes
In article <267@wuibc.UUCP> gerald@wuibc.UUCP (Gerald C. Johns) writes:
>Does anyone have a list of vendors of transputer development
>systems?  I have the INMOS literature, but would like to know
>what alternatives may exist.
>Our host environment could be an IBM PC/AT, a VME-bus, or
>a microVAX.

The german magazine c't published a description of a board called TEK
4/8. This is compatible to the INMOS B004. It can be equipped with T414
or T800 15 or 20 MHz and up to 2 MByte Ram with or without parity.

I am not connected to the c't. 
hase
-- 
Hartmut Semken, Lupsteiner Weg 67, 1000 Berlin 37 hase@netmbx.UUCP
I think, you may be right in what I think you're thinking. (Douglas Adams)
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads