Thread View: comp.sys.transputer
1 messages
1 total messages
Started by Mehmed Ozkan
Thu, 08 Mar 1990 15:49
Re: Another Express problem....
Author: Mehmed Ozkan
Date: Thu, 08 Mar 1990 15:49
Date: Thu, 08 Mar 1990 15:49
32 lines
1336 bytes
1336 bytes
We had a similar problem as Klaus had with EXPRESS. We use a SUN 3/110 as the host system to our transputer network. It has a B011 board with one t800 and a c004 on it. We have a number of transputer boards in an Inmos item box. As we set up the configuration for the root transputer only, every thing works fine. When we connect the external transputers to the root and configure accordingly, the external transputers are not reached even if we proggrammed the cross-bar switch properly. The only solution with the latest release of the EXPRESS is to take the c004 switch out and hardwire an 84-pin header instead, for a fixed configuration. Then things starts moving. However, it is not the most desired solution, since we can not have the flexibilty of a crossbar switch, any more. Mehmed Ozkan Vanderbilt University Center for Intelligent Systems Nashville, TN 37235
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads