SCSI

Thread View: comp.sys.transputer

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by "Phillip M. Hallam-Baker" Thu, 23 Aug 1990 15:19

#926

Author: "Phillip M. Hallam-Baker"
Date: Thu, 23 Aug 1990 15:19

32 lines
1749 bytes

Here's another for Inmos. I have just recived a glossy describing a SCSI
TRAM module. The question is what can I do with it?

At present we are running an array of transputers off a VAX via a Caplin QT0
board stuffed into the Q-bus. This has a number of disadvantages, not least
being that the DEC pricelist quotes several limbs for Q-bus machines 
especialy those with worthwhile processors. I would much rather buy a 3100 and
run the network off the SCSI port. 

Caplin showed us their HEX system which can do the job but seems to be 
designed more with locking the user into Caplin hardware than anything else.
By the time the board was mounted we could have bought another Q-bus.

Specificaly can I boot a network of transputers from a VAX via this SCSI
TRAM ? I would also need to be able to communicate with the SCSI device
via a driver on the VAX - although this dosn't look too hard as DEC give
a device driver prototype for the SCSI.

If booting is a bit too much how about use providing a file server? both
together would be ideal of course...

Has anybody seen or used this device? All comments would be welcome

If anybody knows of another product that does fit the spec I'd be interested.

		Phillip Hallam-Baker

ZEUS group
Oxford University

Disclaimer : the usual.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads