Re: Z-217 problems

Article View: comp.sys.zenith.z100

Article #1003

Back to comp.sys.zenith.z100 Previous Next

#1003

From: Gern
Date: Mon, 15 May 1989 17:48

11 lines
904 bytes

The Z-217 runs HOT!   It is well known to have heat problems.  Without
playing with the board by swapping known good chips, you are shooting in the
dark.  Those ICs always run hot to touch.   It could also be a heat problem
on the data separator board.

>ANY< MFM harddisk up to 90MBytes will work with the Z-217.   Basically
if it is not RLL and works in an IBM, it will work with the Z-217.   You
can use a RLL rated drive, but the Z-217 will revert it to an MFM drive.

Gern
-------

Technical Details

Message-ID: <12494239613.11.GUBBINS@TOPS20.RADC.AF.MIL>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!TOPS20.RADC.AF.MIL!GUBBINS

References: <799@unocss.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!TOPS20.RADC.AF.MIL!GUBBINS
From: GUBBINS@TOPS20.RADC.AF.MIL (Gern)
Newsgroups: comp.sys.zenith.z100
Subject: Re: Z-217 problems
Message-ID: <12494239613.11.GUBBINS@TOPS20.RADC.AF.MIL>
Date: 15 May 89 17:48:02 GMT
References: <799@unocss.UUCP>
Sender: usenet@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 11

Reply to Parent Message