🚀 go-pugleaf

In article <5667@cps3xx.UUCP>, usenet@cps3xx.UUCP (Usenet file owner) writes:
> In article <409@vlsi.ll.mit.edu> malpass@ll-vlsi.arpa.UUCP (Don Malpass) writes:
> > Kermit [ S L O W ] can be made to work, and I assume the Z-100
> >version of Procom with PC-Procom in the Laptop would work, but even
> >with the PC Emulator running in the Z-100 I can't get anything really
> >efficient to run.
> Kermit is probably your best bet, unless you have dos 3.x on your 100
> and it has ZCOM.  LAPLINK will NOT work on the 100.  Most communications
> software talks to hardware and won't run on the 100, even under 
> pc eumlation with zpc.
> 
> I use KERMIT at 9600 baud between my 100 and z183.  Slow, but it works.

I have succesfully hooked up my old H-100 to a Z-183 using procom on
the 183 and a terminal software package call BESTERM on the 100.
Both supported XMODEM transfers.  Also, I have BBS software that
will run on the old 100 (under MS-DOS), which similar results can be
made.  I seem to recall 9600 bps was ok, but 19.2 only worked in one
direction (not both).  Both of these solutions run on the H-100
under it's normal MS-DOS (version 2.x or 3.x), and can work with
only 3 x 64Kbytes of memory installed.

.....rfj.....