Re: Hard Disk in a Z-100

Article View: comp.sys.zenith.z100

Article #153

Back to comp.sys.zenith.z100 Previous Next

#153

From: Tim McCaffrey
Date: Fri, 23 Mar 1990 00:19

7 lines
745 bytes

There is a jumper on the controller which has to be connected before you
can PREP the drive.  I think its labelled "format" or something like that.
It is located in the middle of the board (approx.).

Be sure to remove the jumper after the drive is PREPed to avoid disaster...

			Tim McCaffrey

Technical Details

Message-ID: <886@dvnspc1.Dev.Unisys.COM>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!wuarchive!udel!burdvax!dvnspc1!tmm

References: <KPETERSEN.12574068836.BABYL@WSMR-SIMTEL20.ARMY.MIL> <2033@nosc.NOSC.MIL>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!wuarchive!udel!burdvax!dvnspc1!tmm
From: tmm@dvnspc1.Dev.Unisys.COM (Tim McCaffrey)
Newsgroups: comp.sys.zenith.z100
Subject: Re: Hard Disk in a Z-100
Message-ID: <886@dvnspc1.Dev.Unisys.COM>
Date: 23 Mar 90 00:19:00 GMT
References: <KPETERSEN.12574068836.BABYL@WSMR-SIMTEL20.ARMY.MIL> <2033@nosc.NOSC.MIL>
Organization: Unisys Corporation, Devon, PA
Lines: 7

Reply to Parent Message